|
| |
|
|
|
|
Rating :
Comm Operator is a powerful tool for RS232 related works. It can act as peripheral devices using COM port, such as GPS receiver, total station, relay boards, etc.for software development.
|
|
|
Rating :
PTZ Controller is a software controller of PTZ Camera. It supports pelco D/P protocol. It can perform the full function of traditional hardware controller, while user can control the PTZ dome through computer 232/485/USB port.
|
|
|
Rating :
Comm Operator NCD Edition is a simplified edition of Comm Operator v2.0. It is a custom-made edition for relay controller boards of National Control Devices (NCD). It is a powerful tool for relay controller boards of NCD.
|
|
|
Rating :
Relay Timer Lite is a practical tool that controls the relays from computer.
|
|
|
Rating :
Relay Timer is a powerful tool for NCD ProXR relay controller boards. It supports up to 16 boards. Each board has 16 relays. Each relay can be programmed separately with multiple timers. Relay can be turned on/off manually from GUI easily. As specialized software that intends to control the peripheral devices, the status of all relays can be shown and operated at the same time. It can detect all COM ports automatically regardless of whether they are real COM ports on motherboard or on supplementary in/output boards, or virtual COM ports created by special drivers. The software is developed with latest technology of the windows and it supports 64 bits computer platform as well as latest vista operating system. It can control the relays with very precise timer, while consuming the processor's resource at very low level. It is robust, real-time, and easy to use.
The features of Relay Timer include:
Supports up to 16 boards.
Supports 16 relays on each board with 16 separately control panels.
Supports multiple timers.
Supports turning on/off each relay manually.
Supports turning on/off or inverting all relays directly.
Display the current status of all relays.
Automatically switch to manual mode after specified time.
Status of relays can be saved for later loading.
Time setting can be saved for later loading.
Beautiful GUI and easy to setup and use.
Relay Timer supports ProXR relay controller boards of National Control Devices (NCD) for now. Customization for other boards is available. Customized service for Relay Timer GUI is also available. Such as adding banner, logo and customized button for special functions.
More features will be included in later professional version. Such as running as service program and controlling the boards from the internet/intranet. Embedded system will also be supported.
|
|
|
Rating :
PTZ Controller PPC is an application for Pocket PC to control PTZ camera. It runs on PPC2003SE,WM5.0 and WM6.0. It can perform the full function of traditional hardware keyboard controller. It can control the PTZ camera through Pocket PC Compact Flash slot, and control RS232/485/USB port with a converter. It supports Pelco D/ P protocol,AD protocol, Bosch protocol and Sony protocol.
|
|
|
Rating :
Comm Operator PPC is a powerful RS232 device emulator on Pocket PC.It supports communication with both serial port, include rs232, rs422, rs485 and TCP & UDP based protocol. It works with Wifi, Ethernet and Bluetooth besides normal serial port. It supports data in Text, Decimal as well as Hex format. It also can keep log of the sent and received data. All setting can be saved to a file and loaded later.
|
|
|
Rating :
Relay Timer PPC is a useful tool for NCD ProXR relay controller boards with Pocket PC. It supports 1 board with 8 relays. Each relay can be programmed separately with multiple timers. Relays can be turned on/off manually and automatically according to the time setting. The status of all relays can be changed and displayed at the same time. It can run on PPC2003SE, WM5.0 and WM6.0.
|
|
|
Rating :
Quick Timer is a useful time control tool for NCD ProXR relay boards. Quick time setting makes it easy to use for science project, laboratory experimenter and home automation and so on. It supports one relay board with 16 relay channels. Each channel has a control panel separately. Relays can be turned on/off manually and automatically. Time can be set with counting down or up. It supports rapid buttons for control all relays directly. Friendly interface makes it easier to use.
|
|
|
Rating :
Quick Timer High is useful software for relay boards of NCD ProXR. Quick setting and high resolution makes it easy to use for light control, science project, laboratory experimenter and home automation. It supports 16-relay channels. Each channel has a control panel separately. Relays can be turned on/off manually and automatically. Time can be set with counting down or up. It supports rapid buttons for control all relays directly. Friendly interface makes it easier to use.
|
|
|
Rating :
Quick Timer PPC is an application for Pocket PC to control NCD ProXR relay boards. High resolution timer and quick setting make it easy to use for light control science project, laboratory experimenter and home automation. It supports 8-relay channels. Each channel has a control panel separately. Relays can be turned on/off manually and automatically. Time can be set with counting down or up. It supports rapid buttons for control all relays directly. It runs on PPC2003SE, WM5.0 and WM6.0. Friendly interface makes it easier to use.
|
|
|
Rating :
Relaly Timer R4X is programmble timer software for 4-channel relay boards of National Control Devices. Each relay can be programmed separately with multiple schedules. Recurrence options make schedule setting more powerful and flexible. Relays can be turned on/off manually. The status of all relays can be shown. It can control the relays with very precise timer, while consuming the processor's resource at very low level. It is robust, real-time and easy to use.
|
|
|
Rating :
Relaly Timer R2X is programmble timer software for 2-channel relay boards of National Control Devices. Each relay can be programmed separately with multiple schedules. Recurrence options make schedule setting more powerful and flexible. Relays can be turned on/off manually. The status of all relays can be shown. It can control the relays with very precise timer, while consuming the processor's resource at very low level. It is robust, real-time and easy to use.
|
|
|
Rating :
Relaly Timer R8X is programmble timer software for 8-channel relay boards of National Control Devices. Each relay can be programmed separately with multiple schedules. Recurrence options make schedule setting more powerful and flexible. Relays can be turned on/off manually. The status of all relays can be shown. It can control the relays with very precise timer, while consuming the processor's resource at very low level. It is robust, real-time and easy to use.
|
|
|
Rating :
Quick Timer PPC is an application for Pocket PC to control NCD ProXR relay boards. High resolution timer and quick setting make it easy to use for light control science project, laboratory experimenter and home automation. It supports 8-relay channels. Each channel has a control panel separately. Relays can be turned on/off manually and automatically. Time can be set with counting down or up. It supports rapid buttons for control all relays directly. It runs on PPC2003SE, WM5.0 and WM6.0. Friendly interface makes it easier to use.
|
|
|
Rating :
Quick Timer PPC is an application for Pocket PC to control NCD ProXR relay boards. High resolution timer and quick setting make it easy to use for light control science project, laboratory experimenter and home automation. It supports 8-relay channels. Each channel has a control panel separately. Relays can be turned on/off manually and automatically. Time can be set with counting down or up. It supports rapid buttons for control all relays directly. It runs on PPC2003SE, WM5.0 and WM6.0. Friendly interface makes it easier to use.
|
|
|
Rating :
Relaly Timer R16X is programmble timer software for 16-channel relay boards of National Control Devices. Each relay can be programmed separately with multiple schedules. Recurrence options make schedule setting more powerful and flexible. Relays can be turned on/off manually. The status of all relays can be shown. It can control the relays with very precise timer, while consuming the processor's resource at very low level. It is robust, real-time and easy to use.
|
|
|
Rating :
Quick Timer R2X is high resolution programmble timer software. It works with 2-channel relay controller boards of National Control Devices (NCD) .
It supports Com Port and Network connection between PC and relay board. The conncection status is detected and shown continuously. It will remind after disconnection and recover after reconnection automatically.
Relay can be turned on/off manually and auomatically according to programmble time setting. The current status of relay is updated and displayed simultaneously. Time can be set with counting down or up. It supports rapid buttons to control all relays directly.
Quick time setting and high resolution timer make it easy to use for light control, science project, laboratory experimenter and home automation.
|
|
|
Rating :
Quick Timer R8X PPC is an application for Pocket PC. It can run on PPC2003SE, WM5.0 and WM6.0.
It is used to control 8-channel relay controller boards of National Control Devices (NCD).
It controls relay boards accurately in millisecond. It supports Net Work and Com Port connection between Pocket PC and relay board. The conncection status is detected and shown continuously. Relays can be turned on/off manually and automatically. Time can be set with counting down or up. It is allowed to control both relays directly. The current status of relays is updated and displayed simultaneously.
Quick time setting makes it easy to control lights, science project, laboratory experimenter and home automation.
|
|
|
Rating :
Relay Timer R8X PPC is an application for Pocket PC. It can run on PPC2003SE, WM5.0 and WM6.0.
It is used to control 8-channel relay controller boards of National Control Devices (NCD).
It supports Net Work and Com Port connection between Pocket PC and relay board. The conncection status is detected and shown continuously. It will remind after disconnection and auto recover after reconnection.
Each relay can be programmed separately with multiple timers. Relays can be turned on/off manually and auomatically according to schedule setting.
The current status of relay is updated and displayed simultaneously.
It controls the relay with very precise timer, while consuming the processor's resource at very low level.
|
|
|
Rating :
Relay Timer R2X PPC is an application for Pocket PC. It can run on PPC2003SE, WM5.0 and WM6.0.
It is used to control 2-channel relay controller boards of National Control Devices (NCD).
It supports Net Work and Com Port connection between Pocket PC and relay board. The conncection status is detected and shown continuously. It will remind after disconnection and auto recover after reconnection.
Each relay can be programmed separately with multiple timers. Relays can be turned on/off manually and auomatically according to schedule setting.
The current status of relay is updated and displayed simultaneously.
It controls the relay with very precise timer, while consuming the processor's resource at very low level.
|
|
|
Rating :
Relay Timer R4X PPC is an application for Pocket PC. It can run on PPC2003SE, WM5.0 and WM6.0.
It is used to control 4-channel relay controller boards of National Control Devices (NCD).
It supports Net Work and Com Port connection between Pocket PC and relay board. The conncection status is detected and shown continuously. It will remind after disconnection and auto recover after reconnection.
Each relay can be programmed separately with multiple timers. Relays can be turned on/off manually and auomatically according to schedule setting.
The current status of relay is updated and displayed simultaneously.
It controls the relay with very precise timer, while consuming the processor's resource at very low level.
|
|
|
|
|
|
|
 Copyright (c) 2007-2010 SharewareOrder.com Inc. All rights reserved. |
|
|
