iRecover STD+

iRecover - a comprehensive read-only Windows based data recovery utility.

iRecover is an advanced data recovery program which will assist you to recover information that was lost due to file system corruption, formatting, virus damage, partition deletion, hardware difficulties, RAID issues, etc.

Standard Plus

Allows file recovery: This license corresponds with the "Recover data from a simple volume or from a functional RAID volume" mode in iRecover.
To be used when reconstruction of a RAID/spanned volume layout is not needed. Typical scenarios include:

• No hardware or software RAID involved
• No software RAID involved and hardware RAID is functioning properly
• Windows 200X/XP/Vista/Win7 software RAID/spanned volume visible in Disk Management applet of the Management Console (volume should be listed as "online/healthy"; file system type readout is irrelevant at this point).

As above with the addition of "Image recovery" mode: Specifically tailored to recover photos from a digital camera memory card.

Benefits:

iRecover allows you to create a RAW image file of a volume, a disk or an entire (reconstructed) RAID array and recover data from the image file.

Powerful:
With iRecover, nothing is assumed (the 'zero assumption principle'); it never relies on file system structures on the (damaged) disk and figures everything out by itself.

iRecover will automatically detect the file system type and file system parameters, such as cluster-size. It will even do so if vital file system structures such as the boot sector and partition table are lost. It will recover data even if other file recovery software does not!
iRecover allows you to recover data from broken RAID 0 and RAID 5 arrays (hardware and software): unlike other RAID-capable recovery software you will not have to enter RAID parameters such as stripe size and disk rotation order, iRecover will automatically try to detect these parameters. RAID 5 arrays can even be processed if one member is missing!
Volumes and arrays rapidly grow larger and larger. We have tested iRecover on arrays containing up to 5.000.000 files.
(for data recovery software the number of files detected is a limiting factor, file and volume sizes aren't)

Safe:
iRecover only reads the 'victim' disk! While scavenging the disk for file system structures iRecover constantly monitors the disk's physical condition (if the disk is S.M.A.R.T. capable). 
If any S.M.A.R.T. attributes exceed critical levels iRecover will warn you and/or it will halt operation until it's safe to continue. For example, one of the attributes that can be monitored through S.M.A.R.T. is a disk's temperature. If the disk gets too hot iRecover will pause to allow the disk to cool down and then continue.

Fast:
As disks grow larger, data-recoveries tend to take more time as more data is detected and needs to be analyzed. iRecover now includes a smart Quick-scan for NTFS drives (automatically invoked if applicable). The Quick scan dramatically improves scan speeds on NTFS formatted volumes!